Pincor

Pincor Engines
Listed below are the various models of the Pincor engines and some data regarding them.
Model Crankshaft Type Cylinders Bore Stroke Displacement Carburetor Type Spark Plug Gap
Tightening Torques:
            Connecting Rod = 42-54 inch-lbs.
            Cylinder Head = 180-190 inch-lbs.
            Engine Base Bolts = 72 inch-lbs.
            Flywheel Nut = 25-27 inch-lbs.
            Breaker Point Gap = 0.023-0.025
            Condenser Gap = 0.18-0.25 mfd
(Source: Some of the data are from “Kohler and Small Engines Service Manual”)
4V Vertical 1 2-5/16″ 1-5/8″ 6.8″ Float or Suction 0.025″
4VR Vertical 1 2-5/16″ 1-5/8″ 6.8″ Float or Suction 0.025″
7V Vertical 1 2-5/16″ 1-5/8″ 6.8″ Float or Suction 0.025″
7VR Vertical 1 2-5/16″ 1-5/8″ 7.4″ Float or Suction 0.025″
8V Vertical 1 2-5/16″ 1-3/4″ 6.8″ Float or Suction 0.025″
8VR Vertical 1 2-5/16″ 1-3/4″ 6.8″ Float or Suction 0.025″
9V Vertical 1 2-1/2″ 1-3/4″ 8.6″ Float or Suction 0.025″
9VR Vertical 1 2-1/2″ 1-3/4″ 8.6″ Float or Suction 0.025″